Беспроводной 3G интернет и Wi-Fi устройства

Подключение к 3G интернету и настройка 3G модемов и роутеров, их ремонт. Использование и ремонт Wi-Fi роутеров, точек доступа, камер.
Текущее время: 23 окт 2017, 07:18

Часовой пояс: UTC + 2 часа [ Летнее время ]

Перейти в магазин PortaX




Начать новую тему Ответить на тему  [ Сообщений: 16 ]  На страницу 1, 2  След.
Автор Сообщение
СообщениеДобавлено: 09 окт 2012, 20:01 
Не в сети

Зарегистрирован: 15 июн 2012, 17:36
Сообщения: 3
Благодарил (а): 2 раз.
Поблагодарили: 0 раз.
Всем привет! как настроить роутер TP Link3220 чтобы работал с разными модемами 3G ? у меня чтото работает только с Pantech 175..вставляю другие-нету интернета....как изменять в нём настройки ? подскажите если кто в курсе этой проблемы! спасибо!


Вернуться к началу
 Профиль  
 
СообщениеДобавлено: 09 окт 2012, 21:09 
Не в сети
Аватара пользователя

Зарегистрирован: 21 янв 2012, 01:57
Сообщения: 227
Благодарил (а): 12 раз.
Поблагодарили: 44 раз.
каждый модем имеет свои настройки ! правда обычно если одного производителя и оператора,то одинаковые а если и модем другой и оператор,то отличаться порты на котором модем сидит да и apn в зависимости от оператора,ещё для некоторых vid pid нужно явно указать,а то роутер его видит как обычную флешку !!!


Вернуться к началу
 Профиль  
 
СообщениеДобавлено: 12 окт 2012, 23:05 
Не в сети

Зарегистрирован: 12 окт 2012, 23:03
Сообщения: 1
Благодарил (а): 0 раз.
Поблагодарили: 0 раз.
Здравствуйте! Нужна помощь с роутером TP-Link MR3220
Роутер прошит прошивкой OpenWrt . Пытаясь привязать модем и вместо того что бы настраивать на в клатке WAN во вкладке LAN где стояла надпись статестически и снизу были прописаны ID [ссылка появится после проверки модератором] было выбрано USB modem и нажато сохранить и применить. После этого роутер пропал! И не могу найти его ID находит что то типа 0,0,0,0. Подскажите пожалуйста что делать?
WEb Интерфейс вобще не входит


Вернуться к началу
 Профиль  
 
СообщениеДобавлено: 13 окт 2012, 01:23 
Не в сети
Аватара пользователя

Зарегистрирован: 21 янв 2012, 01:57
Сообщения: 227
Благодарил (а): 12 раз.
Поблагодарили: 44 раз.
ну так сбрось в дефал,какие проблемы? а на будующее будь внимателние...
зажать reset на 15-20 сек,если не сбросит,то выключит,зажать,включить и через 15 сек отпустить... а если и так нет,то в пк установи 192.168.1.27 255.255.255.0 и включи роутер
как маргнет sys так часто нажимай reset , пока sys не начнёт мигать как сумашедший
через putty входишь на 192.168.1.1 (без логина и пароля) и вводишь firstboot Всё сбросит
если что то рядом есть топик,там подробно всё рассписано... удачи


Вернуться к началу
 Профиль  
 
СообщениеДобавлено: 04 фев 2013, 17:34 
Не в сети

Зарегистрирован: 17 дек 2012, 19:21
Сообщения: 45
Благодарил (а): 2 раз.
Поблагодарили: 0 раз.
Здравствуйте не получается подключить zte100 к tp-link3220 с open wrt. Ввожу и vid pid не хочет. Может быть из-за того что модем разлочен под другого оператора? И еще так же он запускается через программу,(на компе) может надо что-то менять?


Вернуться к началу
 Профиль  
 
СообщениеДобавлено: 04 фев 2013, 18:11 
Не в сети
Аватара пользователя

Зарегистрирован: 21 янв 2012, 01:57
Сообщения: 227
Благодарил (а): 12 раз.
Поблагодарили: 44 раз.
hahol писал(а):
Здравствуйте не получается подключить zte100 к tp-link3220 с open wrt. Ввожу и vid pid не хочет. Может быть из-за того что модем разлочен под другого оператора? И еще так же он запускается через программу,(на компе) может надо что-то менять?

надеюсь такие вводите 19d2 0117 и порт usb2 выбираете ... хотя роутер и сам его должен опознавать... без Вашего участия.
hahol писал(а):
Может быть из-за того что модем разлочен под другого оператора?

как раз он и должен быть разлочен под любого оператора...
в зависимости от того переводили Вы его в режим только модем, или же нет... порт у zte или 2 или 3
другого не бывает на старых свистках ;)

прошивка на роуткре,то какая у Вас? от Дантеса или откеда?


Вернуться к началу
 Профиль  
 
СообщениеДобавлено: 04 фев 2013, 19:33 
Не в сети

Зарегистрирован: 17 дек 2012, 19:21
Сообщения: 45
Благодарил (а): 2 раз.
Поблагодарили: 0 раз.
А у меня комп выбивал 19d2 0016. Вбил , модем появится на сеунду вторую и пропадает потм ч-з время опять. Правда и мак адрес и rx\tx кругом ноли. Прошивка kamikaze(r25068) Load:0.150.130.06. Он же если начнет работать , шлюз на wifi сам откроется?


Вернуться к началу
 Профиль  
 
СообщениеДобавлено: 04 фев 2013, 19:56 
Не в сети
Аватара пользователя

Зарегистрирован: 21 янв 2012, 01:57
Сообщения: 227
Благодарил (а): 12 раз.
Поблагодарили: 44 раз.
wifi по дефалту вообще выключен,покажите вкладку wan (где модем настраивали) и system log и kernel log покажите
только сперва перегрузите роутер с воткнутым модемом.


Вернуться к началу
 Профиль  
 
СообщениеДобавлено: 04 фев 2013, 20:15 
Не в сети

Зарегистрирован: 17 дек 2012, 19:21
Сообщения: 45
Благодарил (а): 2 раз.
Поблагодарили: 0 раз.
Mar 27 03:41:02 OpenWrt local2.info chat[5749]: ^M
Mar 27 03:41:02 OpenWrt local2.info chat[5749]: ATD*99#^M^M
Mar 27 03:41:02 OpenWrt local2.info chat[5749]: CONNECT
Mar 27 03:41:02 OpenWrt local2.info chat[5749]: -- got it
Mar 27 03:41:02 OpenWrt local2.info chat[5749]: send (^M)
Mar 27 03:41:02 OpenWrt daemon.info pppd[29337]: Serial connection established.
Mar 27 03:41:02 OpenWrt daemon.info pppd[29337]: Using interface 3g-wan
Mar 27 03:41:02 OpenWrt daemon.notice pppd[29337]: Connect: 3g-wan <--> /dev/ttyUSB2
Mar 27 03:41:03 OpenWrt daemon.info pppd[29337]: CHAP authentication succeeded
Mar 27 03:41:03 OpenWrt daemon.notice pppd[29337]: CHAP authentication succeeded
Mar 27 03:41:04 OpenWrt daemon.info pppd[29337]: Hangup (SIGHUP)
Mar 27 03:41:04 OpenWrt daemon.notice pppd[29337]: Modem hangup
Mar 27 03:41:04 OpenWrt daemon.notice pppd[29337]: Connection terminated.
Mar 27 03:41:04 OpenWrt user.info sysinit: ping: sendto: Network is unreachable
Mar 27 03:41:14 OpenWrt user.info sysinit: ping: sendto: Network is unreachable
Mar 27 03:41:16 OpenWrt local2.info chat[5850]: send (^M)
Mar 27 03:41:16 OpenWrt local2.info chat[5850]: send (ATZ^M)
Mar 27 03:41:16 OpenWrt local2.info chat[5850]: expect (OK)
Mar 27 03:41:16 OpenWrt local2.info chat[5850]: ATZ^M^M
Mar 27 03:41:16 OpenWrt local2.info chat[5850]: OK
Mar 27 03:41:16 OpenWrt local2.info chat[5850]: -- got it
Mar 27 03:41:16 OpenWrt local2.info chat[5850]: send (AT+CGDCONT=1,"IP",""^M)
Mar 27 03:41:17 OpenWrt local2.info chat[5850]: expect (OK)
Mar 27 03:41:17 OpenWrt local2.info chat[5850]: ^M
Mar 27 03:41:17 OpenWrt local2.info chat[5850]: AT+CGDCONT=1,"IP",""^M^M
Mar 27 03:41:17 OpenWrt local2.info chat[5850]: OK
Mar 27 03:41:17 OpenWrt local2.info chat[5850]: -- got it
Mar 27 03:41:17 OpenWrt local2.info chat[5850]: send (ATD*99#^M)
Mar 27 03:41:17 OpenWrt local2.info chat[5850]: expect (CONNECT)
Mar 27 03:41:17 OpenWrt local2.info chat[5850]: ^M
Mar 27 03:41:17 OpenWrt local2.info chat[5850]: ATD*99#^M^M
Mar 27 03:41:17 OpenWrt local2.info chat[5850]: CONNECT
Mar 27 03:41:17 OpenWrt local2.info chat[5850]: -- got it
Mar 27 03:41:17 OpenWrt local2.info chat[5850]: send (^M)
Mar 27 03:41:17 OpenWrt daemon.info pppd[29337]: Serial connection established.
Mar 27 03:41:17 OpenWrt daemon.info pppd[29337]: Using interface 3g-wan
Mar 27 03:41:17 OpenWrt daemon.notice pppd[29337]: Connect: 3g-wan <--> /dev/ttyUSB2
Mar 27 03:41:18 OpenWrt daemon.info pppd[29337]: CHAP authentication succeeded
Mar 27 03:41:18 OpenWrt daemon.notice pppd[29337]: CHAP authentication succeeded
Mar 27 03:41:18 OpenWrt daemon.info pppd[29337]: Hangup (SIGHUP)
Mar 27 03:41:18 OpenWrt daemon.notice pppd[29337]: Modem hangup
Mar 27 03:41:18 OpenWrt daemon.notice pppd[29337]: Connection terminated.
Mar 27 03:41:24 OpenWrt user.info sysinit: ping: sendto: Network is unreachable
Mar 27 03:41:31 OpenWrt local2.info chat[5973]: send (^M)
Mar 27 03:41:31 OpenWrt local2.info chat[5973]: send (ATZ^M)
Mar 27 03:41:31 OpenWrt local2.info chat[5973]: expect (OK)
Mar 27 03:41:31 OpenWrt local2.info chat[5973]: ^M
Mar 27 03:41:31 OpenWrt local2.info chat[5973]: NO CARRIER^M
Mar 27 03:41:31 OpenWrt local2.info chat[5973]: ATZ^M^M
Mar 27 03:41:31 OpenWrt local2.info chat[5973]: OK
Mar 27 03:41:31 OpenWrt local2.info chat[5973]: -- got it
Mar 27 03:41:31 OpenWrt local2.info chat[5973]: send (AT+CGDCONT=1,"IP",""^M)
Mar 27 03:41:31 OpenWrt local2.info chat[5973]: expect (OK)
Mar 27 03:41:31 OpenWrt local2.info chat[5973]: ^M
Mar 27 03:41:31 OpenWrt local2.info chat[5973]: AT+CGDCONT=1,"IP",""^M^M
Mar 27 03:41:31 OpenWrt local2.info chat[5973]: OK
Mar 27 03:41:31 OpenWrt local2.info chat[5973]: -- got it
Mar 27 03:41:31 OpenWrt local2.info chat[5973]: send (ATD*99#^M)
Mar 27 03:41:31 OpenWrt local2.info chat[5973]: expect (CONNECT)
Mar 27 03:41:31 OpenWrt local2.info chat[5973]: ^M
Mar 27 03:41:31 OpenWrt local2.info chat[5973]: ATD*99#^M^M
Mar 27 03:41:31 OpenWrt local2.info chat[5973]: CONNECT
Mar 27 03:41:31 OpenWrt local2.info chat[5973]: -- got it
Mar 27 03:41:31 OpenWrt local2.info chat[5973]: send (^M)
Mar 27 03:41:31 OpenWrt daemon.info pppd[29337]: Serial connection established.
Mar 27 03:41:31 OpenWrt daemon.info pppd[29337]: Using interface 3g-wan
Mar 27 03:41:31 OpenWrt daemon.notice pppd[29337]: Connect: 3g-wan <--> /dev/ttyUSB2
Mar 27 03:41:32 OpenWrt daemon.info pppd[29337]: CHAP authentication succeeded
Mar 27 03:41:32 OpenWrt daemon.notice pppd[29337]: CHAP authentication succeeded
Mar 27 03:41:33 OpenWrt daemon.info pppd[29337]: Hangup (SIGHUP)
Mar 27 03:41:33 OpenWrt daemon.notice pppd[29337]: Modem hangup
Mar 27 03:41:33 OpenWrt daemon.notice pppd[29337]: Connection terminated.
Mar 27 03:41:34 OpenWrt user.info sysinit: ping: sendto: Network is unreachable
Mar 27 03:41:44 OpenWrt user.info sysinit: ping: sendto: Network is unreachable
Mar 27 03:41:45 OpenWrt local2.info chat[6097]: send (^M)
Mar 27 03:41:45 OpenWrt local2.info chat[6097]: send (ATZ^M)
Mar 27 03:41:45 OpenWrt local2.info chat[6097]: expect (OK)
Mar 27 03:41:45 OpenWrt local2.info chat[6097]: ^M
Mar 27 03:41:45 OpenWrt local2.info chat[6097]: NO CARRIER^M
Mar 27 03:41:45 OpenWrt local2.info chat[6097]: ATZ^M^M
Mar 27 03:41:45 OpenWrt local2.info chat[6097]: OK
Mar 27 03:41:45 OpenWrt local2.info chat[6097]: -- got it
Mar 27 03:41:45 OpenWrt local2.info chat[6097]: send (AT+CGDCONT=1,"IP",""^M)
Mar 27 03:41:46 OpenWrt local2.info chat[6097]: expect (OK)
Mar 27 03:41:46 OpenWrt local2.info chat[6097]: ^M
Mar 27 03:41:46 OpenWrt local2.info chat[6097]: AT+CGDCONT=1,"IP",""^M^M
Mar 27 03:41:46 OpenWrt local2.info chat[6097]: OK
Mar 27 03:41:46 OpenWrt local2.info chat[6097]: -- got it
Mar 27 03:41:46 OpenWrt local2.info chat[6097]: send (ATD*99#^M)
Mar 27 03:41:46 OpenWrt local2.info chat[6097]: expect (CONNECT)
Mar 27 03:41:46 OpenWrt local2.info chat[6097]: ^M
Mar 27 03:41:46 OpenWrt local2.info chat[6097]: ATD*99#^M^M
Mar 27 03:41:46 OpenWrt local2.info chat[6097]: CONNECT
Mar 27 03:41:46 OpenWrt local2.info chat[6097]: -- got it
Mar 27 03:41:46 OpenWrt local2.info chat[6097]: send (^M)
Mar 27 03:41:46 OpenWrt daemon.info pppd[29337]: Serial connection established.
Mar 27 03:41:46 OpenWrt daemon.info pppd[29337]: Using interface 3g-wan
Mar 27 03:41:46 OpenWrt daemon.notice pppd[29337]: Connect: 3g-wan <--> /dev/ttyUSB2
Mar 27 03:41:47 OpenWrt daemon.info pppd[29337]: CHAP authentication succeeded
Mar 27 03:41:47 OpenWrt daemon.notice pppd[29337]: CHAP authentication succeeded
Mar 27 03:41:48 OpenWrt daemon.info pppd[29337]: Hangup (SIGHUP)
Mar 27 03:41:48 OpenWrt daemon.notice pppd[29337]: Modem hangup
Mar 27 03:41:48 OpenWrt daemon.notice pppd[29337]: Connection terminated.
Mar 27 03:41:54 OpenWrt user.info sysinit: ping: sendto: Network is unreachable
Mar 27 03:42:00 OpenWrt local2.info chat[6197]: send (^M)
Mar 27 03:42:00 OpenWrt local2.info chat[6197]: send (ATZ^M)
Mar 27 03:42:00 OpenWrt local2.info chat[6197]: expect (OK)
Mar 27 03:42:00 OpenWrt local2.info chat[6197]: ATZ^M^M
Mar 27 03:42:00 OpenWrt local2.info chat[6197]: OK
Mar 27 03:42:00 OpenWrt local2.info chat[6197]: -- got it
Mar 27 03:42:00 OpenWrt local2.info chat[6197]: send (AT+CGDCONT=1,"IP",""^M)
Mar 27 03:42:00 OpenWrt local2.info chat[6197]: expect (OK)
Mar 27 03:42:00 OpenWrt local2.info chat[6197]: ^M
Mar 27 03:42:00 OpenWrt local2.info chat[6197]: AT+CGDCONT=1,"IP",""^M^M
Mar 27 03:42:00 OpenWrt local2.info chat[6197]: OK
Mar 27 03:42:00 OpenWrt local2.info chat[6197]: -- got it
Mar 27 03:42:00 OpenWrt local2.info chat[6197]: send (ATD*99#^M)
Mar 27 03:42:00 OpenWrt local2.info chat[6197]: expect (CONNECT)
Mar 27 03:42:00 OpenWrt local2.info chat[6197]: ^M
Mar 27 03:42:00 OpenWrt local2.info chat[6197]: ATD*99#^M^M
Mar 27 03:42:00 OpenWrt local2.info chat[6197]: CONNECT
Mar 27 03:42:00 OpenWrt local2.info chat[6197]: -- got it
Mar 27 03:42:00 OpenWrt local2.info chat[6197]: send (^M)
Mar 27 03:42:00 OpenWrt daemon.info pppd[29337]: Serial connection established.
Mar 27 03:42:00 OpenWrt daemon.info pppd[29337]: Using interface 3g-wan
Mar 27 03:42:00 OpenWrt daemon.notice pppd[29337]: Connect: 3g-wan <--> /dev/ttyUSB2
Mar 27 03:42:01 OpenWrt daemon.info pppd[29337]: CHAP authentication succeeded
Mar 27 03:42:01 OpenWrt daemon.notice pppd[29337]: CHAP authentication succeeded
Mar 27 03:42:02 OpenWrt daemon.info pppd[29337]: Hangup (SIGHUP)
Mar 27 03:42:02 OpenWrt daemon.notice pppd[29337]: Modem hangup
Mar 27 03:42:02 OpenWrt daemon.notice pppd[29337]: Connection terminated.
Mar 27 03:42:04 OpenWrt user.info sysinit: ping: sendto: Network is unreachable
Mar 27 03:42:14 OpenWrt local2.info chat[6319]: send (^M)
Mar 27 03:42:14 OpenWrt local2.info chat[6319]: send (ATZ^M)
Mar 27 03:42:14 OpenWrt local2.info chat[6319]: expect (OK)
Mar 27 03:42:14 OpenWrt local2.info chat[6319]: ATZ^M^M
Mar 27 03:42:14 OpenWrt local2.info chat[6319]: OK
Mar 27 03:42:14 OpenWrt local2.info chat[6319]: -- got it
Mar 27 03:42:14 OpenWrt local2.info chat[6319]: send (AT+CGDCONT=1,"IP",""^M)
Mar 27 03:42:14 OpenWrt user.info sysinit: ping: sendto: Network is unreachable
Mar 27 03:42:15 OpenWrt local2.info chat[6319]: expect (OK)
Mar 27 03:42:15 OpenWrt local2.info chat[6319]: ^M
Mar 27 03:42:15 OpenWrt local2.info chat[6319]: AT+CGDCONT=1,"IP",""^M^M
Mar 27 03:42:15 OpenWrt local2.info chat[6319]: OK
Mar 27 03:42:15 OpenWrt local2.info chat[6319]: -- got it
Mar 27 03:42:15 OpenWrt local2.info chat[6319]: send (ATD*99#^M)
Mar 27 03:42:15 OpenWrt local2.info chat[6319]: expect (CONNECT)
Mar 27 03:42:15 OpenWrt local2.info chat[6319]: ^M
Mar 27 03:42:15 OpenWrt local2.info chat[6319]: ATD*99#^M^M
Mar 27 03:42:15 OpenWrt local2.info chat[6319]: CONNECT
Mar 27 03:42:15 OpenWrt local2.info chat[6319]: -- got it
Mar 27 03:42:15 OpenWrt local2.info chat[6319]: send (^M)
Mar 27 03:42:15 OpenWrt daemon.info pppd[29337]: Serial connection established.
Mar 27 03:42:15 OpenWrt daemon.info pppd[29337]: Using interface 3g-wan
Mar 27 03:42:15 OpenWrt daemon.notice pppd[29337]: Connect: 3g-wan <--> /dev/ttyUSB2
Mar 27 03:42:16 OpenWrt daemon.info pppd[29337]: CHAP authentication succeeded
Mar 27 03:42:16 OpenWrt daemon.notice pppd[29337]: CHAP authentication succeeded
Mar 27 03:42:17 OpenWrt daemon.info pppd[29337]: Hangup (SIGHUP)
Mar 27 03:42:17 OpenWrt daemon.notice pppd[29337]: Modem hangup
Mar 27 03:42:17 OpenWrt daemon.notice pppd[29337]: Connection terminated.
Mar 27 03:42:24 OpenWrt user.info sysinit: ping: sendto: Network is unreachable
Mar 27 03:42:30 OpenWrt local2.info chat[6444]: send (^M)
Mar 27 03:42:30 OpenWrt local2.info chat[6444]: send (ATZ^M)
Mar 27 03:42:30 OpenWrt local2.info chat[6444]: expect (OK)
Mar 27 03:42:30 OpenWrt local2.info chat[6444]: ATZ^M^M
Mar 27 03:42:30 OpenWrt local2.info chat[6444]: OK
Mar 27 03:42:30 OpenWrt local2.info chat[6444]: -- got it
Mar 27 03:42:30 OpenWrt local2.info chat[6444]: send (AT+CGDCONT=1,"IP",""^M)
Mar 27 03:42:30 OpenWrt local2.info chat[6444]: expect (OK)
Mar 27 03:42:30 OpenWrt local2.info chat[6444]: ^M
Mar 27 03:42:30 OpenWrt local2.info chat[6444]: AT+CGDCONT=1,"IP",""^M^M
Mar 27 03:42:30 OpenWrt local2.info chat[6444]: OK
Mar 27 03:42:30 OpenWrt local2.info chat[6444]: -- got it
Mar 27 03:42:30 OpenWrt local2.info chat[6444]: send (ATD*99#^M)
Mar 27 03:42:30 OpenWrt local2.info chat[6444]: expect (CONNECT)
Mar 27 03:42:30 OpenWrt local2.info chat[6444]: ^M
Mar 27 03:42:30 OpenWrt local2.info chat[6444]: ATD*99#^M^M
Mar 27 03:42:30 OpenWrt local2.info chat[6444]: CONNECT
Mar 27 03:42:30 OpenWrt local2.info chat[6444]: -- got it
Mar 27 03:42:30 OpenWrt local2.info chat[6444]: send (^M)
Mar 27 03:42:30 OpenWrt daemon.info pppd[29337]: Serial connection established.
Mar 27 03:42:30 OpenWrt daemon.info pppd[29337]: Using interface 3g-wan
Mar 27 03:42:30 OpenWrt daemon.notice pppd[29337]: Connect: 3g-wan <--> /dev/ttyUSB2
Mar 27 03:42:31 OpenWrt daemon.info pppd[29337]: CHAP authentication succeeded
Mar 27 03:42:31 OpenWrt daemon.notice pppd[29337]: CHAP authentication succeeded
Mar 27 03:42:32 OpenWrt daemon.info pppd[29337]: Hangup (SIGHUP)
Mar 27 03:42:32 OpenWrt daemon.notice pppd[29337]: Modem hangup
Mar 27 03:42:32 OpenWrt daemon.notice pppd[29337]: Connection terminated.
Mar 27 03:42:34 OpenWrt user.info sysinit: ping: sendto: Network is unreachable
Mar 27 03:42:44 OpenWrt local2.info chat[6570]: send (^M)
Mar 27 03:42:44 OpenWrt local2.info chat[6570]: send (ATZ^M)
Mar 27 03:42:44 OpenWrt local2.info chat[6570]: expect (OK)
Mar 27 03:42:44 OpenWrt local2.info chat[6570]: ATZ^M^M
Mar 27 03:42:44 OpenWrt local2.info chat[6570]: OK
Mar 27 03:42:44 OpenWrt local2.info chat[6570]: -- got it
Mar 27 03:42:44 OpenWrt local2.info chat[6570]: send (AT+CGDCONT=1,"IP",""^M)
Mar 27 03:42:44 OpenWrt local2.info chat[6570]: expect (OK)
Mar 27 03:42:44 OpenWrt local2.info chat[6570]: ^M
Mar 27 03:42:44 OpenWrt local2.info chat[6570]: AT+CGDCONT=1,"IP",""^M^M
Mar 27 03:42:44 OpenWrt local2.info chat[6570]: OK
Mar 27 03:42:44 OpenWrt local2.info chat[6570]: -- got it
Mar 27 03:42:44 OpenWrt local2.info chat[6570]: send (ATD*99#^M)
Mar 27 03:42:44 OpenWrt local2.info chat[6570]: expect (CONNECT)
Mar 27 03:42:44 OpenWrt local2.info chat[6570]: ^M
Mar 27 03:42:44 OpenWrt local2.info chat[6570]: ATD*99#^M^M
Mar 27 03:42:44 OpenWrt local2.info chat[6570]: CONNECT
Mar 27 03:42:44 OpenWrt local2.info chat[6570]: -- got it
Mar 27 03:42:44 OpenWrt local2.info chat[6570]: send (^M)
Mar 27 03:42:44 OpenWrt daemon.info pppd[29337]: Serial connection established.
Mar 27 03:42:44 OpenWrt daemon.info pppd[29337]: Using interface 3g-wan
Mar 27 03:42:44 OpenWrt daemon.notice pppd[29337]: Connect: 3g-wan <--> /dev/ttyUSB2
Mar 27 03:42:45 OpenWrt user.info sysinit: ping: sendto: Network is unreachable
Mar 27 03:42:46 OpenWrt daemon.info pppd[29337]: CHAP authentication succeeded
Mar 27 03:42:46 OpenWrt daemon.notice pppd[29337]: CHAP authentication succeeded
Mar 27 03:42:46 OpenWrt daemon.info pppd[29337]: Hangup (SIGHUP)
Mar 27 03:42:46 OpenWrt daemon.notice pppd[29337]: Modem hangup
Mar 27 03:42:46 OpenWrt daemon.notice pppd[29337]: Connection terminated.
Mar 27 03:42:55 OpenWrt user.info sysinit: ping: sendto: Network is unreachable
Mar 27 03:42:59 OpenWrt local2.info chat[6686]: send (^M)
Mar 27 03:42:59 OpenWrt local2.info chat[6686]: send (ATZ^M)
Mar 27 03:42:59 OpenWrt local2.info chat[6686]: expect (OK)
Mar 27 03:42:59 OpenWrt local2.info chat[6686]: ^M
Mar 27 03:42:59 OpenWrt local2.info chat[6686]: NO CARRIER^M
Mar 27 03:42:59 OpenWrt local2.info chat[6686]: ATZ^M^M
Mar 27 03:42:59 OpenWrt local2.info chat[6686]: OK
Mar 27 03:42:59 OpenWrt local2.info chat[6686]: -- got it
Mar 27 03:42:59 OpenWrt local2.info chat[6686]: send (AT+CGDCONT=1,"IP",""^M)
Mar 27 03:42:59 OpenWrt local2.info chat[6686]: expect (OK)
Mar 27 03:42:59 OpenWrt local2.info chat[6686]: ^M
Mar 27 03:42:59 OpenWrt local2.info chat[6686]: AT+CGDCONT=1,"IP",""^M^M
Mar 27 03:42:59 OpenWrt local2.info chat[6686]: OK
Mar 27 03:42:59 OpenWrt local2.info chat[6686]: -- got it
Mar 27 03:42:59 OpenWrt local2.info chat[6686]: send (ATD*99#^M)
Mar 27 03:42:59 OpenWrt local2.info chat[6686]: expect (CONNECT)
Mar 27 03:42:59 OpenWrt local2.info chat[6686]: ^M
Mar 27 03:42:59 OpenWrt local2.info chat[6686]: ATD*99#^M^M
Mar 27 03:42:59 OpenWrt local2.info chat[6686]: CONNECT
Mar 27 03:42:59 OpenWrt local2.info chat[6686]: -- got it
Mar 27 03:42:59 OpenWrt local2.info chat[6686]: send (^M)
Mar 27 03:42:59 OpenWrt daemon.info pppd[29337]: Serial connection established.
Mar 27 03:42:59 OpenWrt daemon.info pppd[29337]: Using interface 3g-wan
Mar 27 03:42:59 OpenWrt daemon.notice pppd[29337]: Connect: 3g-wan <--> /dev/ttyUSB2
Mar 27 03:43:00 OpenWrt daemon.info pppd[29337]: CHAP authentication succeeded
Mar 27 03:43:00 OpenWrt daemon.notice pppd[29337]: CHAP authentication succeeded
Mar 27 03:43:01 OpenWrt daemon.info pppd[29337]: Hangup (SIGHUP)
Mar 27 03:43:01 OpenWrt daemon.notice pppd[29337]: Modem hangup
Mar 27 03:43:01 OpenWrt daemon.notice pppd[29337]: Connection terminated.
Mar 27 03:43:05 OpenWrt user.info sysinit: ping: sendto: Network is unreachable


Вернуться к началу
 Профиль  
 
СообщениеДобавлено: 04 фев 2013, 20:15 
Не в сети

Зарегистрирован: 17 дек 2012, 19:21
Сообщения: 45
Благодарил (а): 2 раз.
Поблагодарили: 0 раз.
pi0.0: searching for MyLoader partition table at offset 0x30000
spi0.0: searching for MyLoader partition table at offset 0x40000
spi0.0: no MyLoader partition table found
Searching for RedBoot partition table in spi0.0 at offset 0x3e0000
Searching for RedBoot partition table in spi0.0 at offset 0x3f0000
No RedBoot partition table detected in spi0.0
spi0.0: no WRT160NL signature found
Creating 5 MTD partitions on "spi0.0":
0x000000000000-0x000000020000 : "u-boot"
0x000000020000-0x000000160000 : "kernel"
0x000000160000-0x0000003f0000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=380000, len=70000
0x000000380000-0x0000003f0000 : "rootfs_data"
0x0000003f0000-0x000000400000 : "art"
0x000000020000-0x0000003f0000 : "firmware"
ag71xx_mdio: probed
eth0: Atheros AG71xx at 0xba000000, irq 5
eth0: Found an AR7240 built-in switch
eth1: Atheros AG71xx at 0xb9000000, irq 4
eth1: using fixed link parameters
Atheros AR71xx hardware watchdog driver version 0.1.0
ar71xx-wdt: timeout=15 secs (max=21)
TCP westwood registered
NET: Registered protocol family 17
Bridge firewalling registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
turn off boot console early0
VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Freeing unused kernel memory: 148k freed
Please be patient, while OpenWrt loads ...
input: gpio-buttons as /devices/platform/gpio-buttons/input/input0
Button Hotplug driver version 0.4.1
eth0: link up (1000Mbps/Full duplex)
Registered led device: tl-mr3x20:green:system
Registered led device: tl-mr3x20:green:qss
Registered led device: tl-mr3x20:green:3g
mini_fo: using base directory: /
mini_fo: using storage directory: /overlay
eth0: link down
eth0: link up (1000Mbps/Full duplex)
device eth0 entered promiscuous mode
br-lan: port 1(eth0) entering forwarding state
eth1: link up (100Mbps/Full duplex)
Compat-wireless backport release: compat-wireless-2011-01-31-19-g74d6d79
Backport based on wireless-testing.git master-2011-02-25
cfg80211: Calling CRDA to update world regulatory domain
HDLC line discipline maxframe=4096
N_HDLC line discipline registered.
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Setting latency timer of device 0000:00:00.0 to 64
ath: EEPROM regdomain: 0x0
ath: EEPROM indicates default country code should be used
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Registered led device: ath9k-phy0
ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xb0000000, irq=48
cfg80211: Calling CRDA for country: US
PPP generic driver version 2.4.2
PPP MPPE Compression module registered
GRE over IPv4 demultiplexor driver
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 24
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ar71xx-ehci ar71xx-ehci: Atheros AR91xx built-in EHCI controller
ar71xx-ehci ar71xx-ehci: new USB bus registered, assigned bus number 1
ar71xx-ehci ar71xx-ehci: irq 3, io mem 0x1b000000
ar71xx-ehci ar71xx-ehci: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
nf_conntrack version 0.5.0 (462 buckets, 1848 max)
usb 1-1: new high speed USB device using ar71xx-ehci and address 2
PPTP driver version 0.8.5
usb 1-1: configuration #1 chosen from 1 choice
nf_conntrack_rtsp v0.6.21 loading
nf_nat_rtsp v0.6.21 loading
Ebtables v2.0 registered
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usblp
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for GSM modem (1-port)
option 1-1:1.0: GSM modem (1-port) converter detected
usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
option 1-1:1.1: GSM modem (1-port) converter detected
usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
option 1-1:1.2: GSM modem (1-port) converter detected
usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
USB Serial support registered for Sierra USB modem
usbcore: registered new interface driver sierra
sierra: v.1.3.8:USB Driver for Sierra Wireless USB modems
eth1: link down
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
ar71xx-wdt: enabling watchdog timer
br-lan: port 2(wlan0) entering disabled state
br-lan: port 1(eth0) entering disabled state
eth0: link down
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device eth0 left promiscuous mode
br-lan: port 1(eth0) entering disabled state
eth0: link up (1000Mbps/Full duplex)
eth0: link down
eth0: link up (1000Mbps/Full duplex)
device eth0 entered promiscuous mode
br-lan: port 1(eth0) entering forwarding state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
eth1: link up (100Mbps/Full duplex)
eth1: link down
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
br-lan: port 2(wlan0) entering disabled state
br-lan: port 1(eth0) entering disabled state
eth0: link down
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device eth0 left promiscuous mode
br-lan: port 1(eth0) entering disabled state
eth0: link up (1000Mbps/Full duplex)
eth0: link down
eth0: link up (1000Mbps/Full duplex)
device eth0 entered promiscuous mode
br-lan: port 1(eth0) entering forwarding state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
eth1: link up (100Mbps/Full duplex)
eth1: link down
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
br-lan: port 2(wlan0) entering disabled state
br-lan: port 1(eth0) entering disabled state
eth0: link down
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device eth0 left promiscuous mode
br-lan: port 1(eth0) entering disabled state
eth0: link up (1000Mbps/Full duplex)
eth0: link down
eth0: link up (1000Mbps/Full duplex)
device eth0 entered promiscuous mode
br-lan: port 1(eth0) entering forwarding state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
eth1: link up (100Mbps/Full duplex)
eth1: link down
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
br-lan: port 2(wlan0) entering disabled state
br-lan: port 1(eth0) entering disabled state
eth0: link down
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device eth0 left promiscuous mode
br-lan: port 1(eth0) entering disabled state
eth0: link up (1000Mbps/Full duplex)
eth0: link down
eth0: link up (1000Mbps/Full duplex)
device eth0 entered promiscuous mode
br-lan: port 1(eth0) entering forwarding state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
eth1: link up (100Mbps/Full duplex)
eth1: link down
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
br-lan: port 2(wlan0) entering disabled state
br-lan: port 1(eth0) entering disabled state
eth0: link down
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device eth0 left promiscuous mode
br-lan: port 1(eth0) entering disabled state
eth0: link up (1000Mbps/Full duplex)
eth0: link down
eth0: link up (1000Mbps/Full duplex)
device eth0 entered promiscuous mode
br-lan: port 1(eth0) entering forwarding state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
eth1: link up (100Mbps/Full duplex)
eth1: link down
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
br-lan: port 2(wlan0) entering disabled state
br-lan: port 1(eth0) entering disabled state
eth0: link down
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device eth0 left promiscuous mode
br-lan: port 1(eth0) entering disabled state
eth0: link up (1000Mbps/Full duplex)
eth0: link down
eth0: link up (1000Mbps/Full duplex)
device eth0 entered promiscuous mode
br-lan: port 1(eth0) entering forwarding state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
eth1: link up (100Mbps/Full duplex)
eth1: link down
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
br-lan: port 2(wlan0) entering disabled state
br-lan: port 1(eth0) entering disabled state
eth0: link down
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device eth0 left promiscuous mode
br-lan: port 1(eth0) entering disabled state
eth0: link up (1000Mbps/Full duplex)
eth0: link down
eth0: link up (1000Mbps/Full duplex)
device eth0 entered promiscuous mode
br-lan: port 1(eth0) entering forwarding state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
eth1: link up (100Mbps/Full duplex)
eth1: link down
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
br-lan: port 2(wlan0) entering disabled state
br-lan: port 1(eth0) entering disabled state
eth0: link down
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device eth0 left promiscuous mode
br-lan: port 1(eth0) entering disabled state
eth0: link up (1000Mbps/Full duplex)
eth0: link down
eth0: link up (1000Mbps/Full duplex)
device eth0 entered promiscuous mode
br-lan: port 1(eth0) entering forwarding state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
eth1: link up (100Mbps/Full duplex)
eth1: link down
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
br-lan: port 2(wlan0) entering disabled state
br-lan: port 1(eth0) entering disabled state
eth0: link down
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device eth0 left promiscuous mode
br-lan: port 1(eth0) entering disabled state
eth0: link up (1000Mbps/Full duplex)
eth0: link down
eth0: link up (1000Mbps/Full duplex)
device eth0 entered promiscuous mode
br-lan: port 1(eth0) entering forwarding state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
eth1: link up (100Mbps/Full duplex)
eth1: link down
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
br-lan: port 2(wlan0) entering disabled state
br-lan: port 1(eth0) entering disabled state
eth0: link down
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device eth0 left promiscuous mode
br-lan: port 1(eth0) entering disabled state
eth0: link up (1000Mbps/Full duplex)
eth0: link down
eth0: link up (1000Mbps/Full duplex)
device eth0 entered promiscuous mode
br-lan: port 1(eth0) entering forwarding state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
eth1: link up (100Mbps/Full duplex)
eth1: link down
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state


Вернуться к началу
 Профиль  
 
Показать сообщения за:  Поле сортировки  
Начать новую тему Ответить на тему  [ Сообщений: 16 ]  На страницу 1, 2  След.

Часовой пояс: UTC + 2 часа [ Летнее время ]

Перейти в магазин PortaX


Кто сейчас на конференции

Зарегистрированные пользователи: нет зарегистрированных пользователей


Вы не можете начинать темы
Вы не можете отвечать на сообщения
Вы не можете редактировать свои сообщения
Вы не можете удалять свои сообщения
Вы не можете добавлять вложения

Перейти:  
cron
Создано на основе phpBB® Forum Software © phpBB Group
Украина онлайн